DASS HL Series (vertical type)

Short Description:

HL SERIES VERTICAL TYPE RUBBER INJECTION MOLDING MACHINE

Machine feature overview

1. Steady and fast design

2. 4 guide pillar machine

3. Thicker fixed platen

4. Increase the plunger diameter

5. Machinery running smoothly and fast

Optimized the heating platen size and injection volume


Product Detail

HL 160T

HL 250T

HL 400T

Product Tags

Machine feature overview

1. Steady and fast design

2. 4 guide pillar machine

3. Thicker fixed platen

4. Increase the plunger diameter

5. Machinery running smoothly and fast

Optimized the heating platen size and injection volume

 

 

About Hauli:

Huali brand based in Ningbo, China which has been chosen by our domestic and Southeast Asian customers for years for its stability and high-cost performance. Integrated optimized three

key supporting technologies of machinery, hydraulic and electronic control, owning a powerful ability to meet customers' requirements, supply high-efficiency, reliable,energy-saving hydraulic molding machinery according to customers' requests, help our customers to be a strong performer in market competition. Comparing with Doush brand rubber machine, Huali is widely acceptable by its economical purchasing price and stable press quality.

Injection molding machines are used to make all kinds of oil seals, dust seals, o-rings, shaft seals, car window seals, medical syringe pistons, diving masks, and so on. Huali focuses on compression and injection molding solutions. We keep innovation on the technology for rubber and silicone injection molding solutions and help our customers to find the way and cut the edge.

 

 

 


  • Previous:
  • Next:

  •   HL-160T
    Mode-locking force KN 1600
    Open die force KN 58
    Opening stroke KN 500
    Maximum hot plate spacing MM 500
    Hot plate size MM 500×530
    Ejection stroke (force) MM(SCE/KN) 250(62.8)
    Closing veiocity MM(SCE) 470
    die sinking velocity MM(SCE) 470
    Injection unit
    Maximum injection volume CM3 1250
    Maximum injection pressure BAR 2000
    Maximum injection capacity CM3/SEC 80-140
    Screw diameter MM 35
    Screw length diameter ratio L:D 10:01
    Maximum screw speed RPM 540
    Vulcanization capacity CM3/SEC 80-105
    Heating partition number  3×2
    Hydraulic unit
    System pressure BAR 160-180
    Maximum flow rate of oil pump I/MIN 32-64(servo control )
    Tank volume I 270
    Electrical equipment
    Power supply KW 46
    Motor power KW 14
    Electrothermal power KW 15.6
    Controller voltage V 24
      HL-250T
    Mode-locking force KN 2500
    Open die force KN 58
    Opening stroke KN 500
    Maximum hot plate spacing MM 600
    Hot plate size MM 600×640
    Ejection stroke (force) MM(SCE/KN) 250(62.8)
    Closing veiocity MM(SCE) 470
    die sinking velocity MM(SCE) 470
    Injection unit
    Maximum injection volume CM3 2750
    Maximum injection pressure BAR 2600
    Maximum injection capacity CM3/SEC 80-140
    Screw diameter MM 45
    Screw length diameter ratio L:D 10:01
    Maximum screw speed RPM 140/2800
    Vulcanization capacity CM3/SEC 80-105
    Heating partition number 3
    Hydraulic unit
    System pressure BAR 250-270
    Maximum flow rate of oil pump I/MIN 32-64(servo control )
    Tank volume I 340
    Electrical equipment
    Power supply KW 46
    Motor power KW 14
    Electrothermal power KW 15.6
    Controller voltage V 24
      HL-400T
    Mode-locking force KN 4000
    Open die force KN 93
    Opening stroke KN 600
    Maximum hot plate spacing MM 750
    Hot plate size MM 810×900
    Ejection stroke (force) MM(SCE/KN) 300(98)
    Injection unit
    Maximum injection volume CM3 3000
    Maximum injection pressure BAR 2310
    Maximum injection capacity CM3/SEC 120-160
    Screw diameter MM 52
    Screw length diameter ratio L:D 10:01
    Vulcanization capacity CM3/SEC 200-250
    Hydraulic unit
    System pressure BAR 250-280
    Maximum flow rate of oil pump I/MIN 71(servo control )
    Electrical equipment
    Motor power KW 22
    Electrothermal power KW 25.6
    Controller voltage V 24
  • Write your message here and send it to us

    Products categories